The use of Carbon Reactor will be required to remove any ozone produced oxidants from the water supply before entering the aquarium.

             

You can use either the Midi 100 (hang-on Only).. or the PO4 150 for the O150 and O300
The O1000 and O3000 will require the PO4 150 or the larger Pro 300
^isaprocart^

The Ozone Reactor works by mixing the water and Ozone in a pressurised reactor ... allowing greater saturation with minimal ozone lose, making it a very efficient unit.  

 

Pump Requirement: 1500lph - 3000lph (giving 2-4psi)

Lower output pumps can be used, but will reduce the efficiency of the unit.

 

Air Pump Requirent: 500lph (4psi+)

 

Hosetails (mm):

Inlet 20

Outlet 12 (use 10mm piping for a nice water tight fit).

 

Dimensions (mm):

Height:           400

Base footprint: 130

Column Dia:     90

 

Quantity:
Buy Now:

  

The O300 can be used for both aquarium and pond use (aquarium 300gals/ 1000l and pond 1000gals/ 4400l).

 

Pump Requirement: 1500lph - 3000lph (giving 2-4psi)

Lower output pumps can be used, but will reduce the efficiency of the unit.

 

Air Pump Requirement: 500lph (4psi+)

 

Hosetails (mm):

Inlet 20

Outlet 12 (use 10mm piping for a nice water tight fit)

 

Dimensions (mm):

Height:              600

Base footprint: 130

Column Dia:      90

Quantity:
Buy Now:

 

The O1000 can be used for both aquarium and pond use (aquarium 1000gals/ 4400/ and pond 2000gals/ 8000l).

 

Pump Requirement: 2000lph - 3000lph (giving 2-4psi)

Lower output pumps can be used, but will reduce the efficiency of the unit.

 

Air Pump Requirement: 500lph (4psi+)

 

Hosetails (mm):

Inlet 20

Outlet 13.

 

Dimensions (mm) :

Height:             600

Base footprint: 165

Column Dia:     150

Quantity:
Buy Now: